M2CArrma 8S CARBON ROD END 2mm Wall

For 12MM ID X 16MM OD Carbon fiber tube. 2MM is the wall thickness. (Carbon tube not included)

THE M2C 3291 MONSTER ROD ENDS FOR THE ARRMA 8 S LINE OF TRUCKS IS THE SOLUTION!!!!

Bashers have been using these carbon fiber tubes over their braces for years.

I just didn't like the unfinished look, so I came up with a solution that that will clean it up!!

**If you have the M2C MEGA KRATON you will need the 3291 (3 packs), as well as 1 pack M2C 3836 MEGA MONSTER ROD ENDS**

**Please see the M2C 3208 for the smaller 1mm Wall thickness tube compatibility.

Installation is super easy, just cut your carbon tube to slightly shorter than your brace (1MM recommended).

I have included 2 2MM o rings to take up the slack between the tube and the end.

HAS A 1/8" THRU HOLE IN CASE YOU BREAK THE SCREW, YOU CAN JUST DRILL IT OUT FROM THE FRONT!

PRO TIP!! I have included 2 .5mm shims, you want the ends to be TIGHT.

You want 1/8 to 1/4 of a turn past hand tight and the flats to be in line (use hex drivers).

You can use the included shims to achieve this.

You will need to dremel your steering top plate flush as shown to use these MONSTER rod ends.