M2CArrma 8S CARBON ROD END 1mm Wall

For 12MM ID X 14MM OD Carbon fiber tube. 1MM is the wall thickness. (Carbon tube not included)

THE M2C 3208 CARBON ROD ENDS FOR THE ARRMA 8 S LINE OF TRUCKS IS THE SOLUTION!!!!

Bashers have been using these carbon fiber tubes over their braces for years.

I just didn't like the unfinished look, so I came up with a solution that that will clean it up!!

**If you have the M2C MEGA KRATON you will need the M2C 3291, as well as M2C 3836 MEGA MONSTER ROD ENDS**

Installation is super easy, just cut your carbon tube to slightly shorter than your brace (1MM recommended).

I have included 2 2MM o rings to take up the slack between the tube and the end.

HAS A 1/8" THRU HOLE IN CASE YOU BREAK THE SCREW, YOU CAN JUST DRILL IT OUT FROM THE FRONT!

PRO TIP!! I have included 2 .5mm shims, you want the ends to be TIGHT.

You want 1/8 to 1/4 of a turn past hand tight and the flats to be in line (use hex drivers as shown in video).

You can use the included shims to achieve this.