M2c TRAXXAX SLEDGE REAR LOWER OUTER HINGE PINS

These hinge  pins are made using 4140 tool steel. hardened and black oxide coated. 

We use a 4mm lock nut to secure the pins to ensure that nothing pops out on 1 end and a machined head on the other end.

KIT CONTENTS:

2 hinge pins

2 4mm lock nuts

2 plastic flat washers

NOTE: DO NOT OVER TIGHEN 4MM LOCK NUT. LOCK TIGHT IS NOT NEEDED.

YOU WILL NEED A 4MM DRILL TO INSTALL THESE PARTS.