M2C JACKHAMMR KIT FOR Traxxas Sledge

You've seen the videos and posts from the M2C TEST TEAM. This truck has not just survived, it's DOMINATED!!!!!!!!!!

Get ready for your new favorite truck!!! The handling and air control are unmatched!!!!

This kit is the upgrade kit to your current truck using all your current (even factory) electronics!!!!!

****NOTE***** This kit is not for the faint of heart. This kit is for the experienced RC builder. There's alot of parts, and ALOT of options!*******

You can mount almost any motor / esc combination, in the forward or reverse positions, all with the revolutionary M2C 1472 ESC PLATE !!!!!!

If you already have the M2C forward, or reverse motor mount, you're all set!!! (our motor mounts have 25MM bolt pattern)

If you want to upgrade to a reverse motor mount and dont have ours yet, you can upgrade to the M2C 1466 REVERSE MOTOR MOUNT KIT FOR M2C JACKHAMMR (pieces not needed for JACKHAMMR removed).

(1) 1475 JACKHAMMR CHASSIS with 1415 FLYWHEEL COVER

(1) 1489 FRONT SHOCK TOWER (CARBON FIBER OPTIONAL)

(1) 1488 REAR SHOCK TOWER (CARBON FIBER OPTIONAL)

(1) 1471 SHOCK TOWER CENTER BRACE (This brace is 6061 on purpose. It may do its job and bend in a crash, just straighten it with a rubber hammer, and go bash. Keep in mind this is the longest 1/7 car in the world, its gonna flex. All we can do is control it.)

(1) 1472 ESC PLATE

(1) 1474 CENTER BRACE MOUNT (pr)

(1) 1491 SLEDGE REAR CENTER DRIVESHAFT

(1) 1419 REAR MOTOR SUPPORT KIT. (1417 + 1428)

(1) 1467 ROLL CAGE MOUNTS (pr)

(1) M2C 6964 Body mount kit (Arrma AR32065 AND AR320357)

*M2C TEST TEAM TIPS

*We recommend that you drill through your stock F/R center chassis braces and secure them with a longer screw and a locknut on top for extra stiffness

*We have found they prefer a bolt with a locknut for the wing mount as opposed to using the extra braces in the rear. (our chassis has the holes if you prefer to use them).

*To use M2C 1467 roll cage mounts, you must lower the cage by cutting off the bottom mounting positions.

*The M2C 1491 SLEDGE REAR CENTER DRIVESHAFT fits front and rear positions. But, because of the increased thickness it will rub your center brace. We recommend using the stock rear center shaft in the FRONT position, and the thicker M2C shaft in the rear.

*VG Racing GT Blue Springs are working well with 80-90wt oils (this is personal preference of course)

*The side guards will need to be modified. While we made it so you could use 2 sets and have a complete guard, the guys prefer for the back to be open to let rocks and debris out.

*The RPM front bumper is an awesome addition to this truck as well.

*You will need your stock motor mount bolts for the M2C 1410 motor support. Or order 9591 screw kit online

Optional parts for arrma battery tray / receiver box / servo mount usage (these can be found in our ARRMA factory parts section).

SERVO MOUNT M2C 320574 OR ARRMA #ARA320574

BATTERY TRAY ARRMA #AR320351

RADIO BOX ARRMA #ARA320604

CENTER ROLL CAGE ARRMA #AR320273 (* requires modifications to bottom -cut off. As well as the cross braces, you must cut the X out.- see pics)

ROLL TOWER TOP ARRMA #AR320324

M2C 1465 HARDWARE KIT FOR ROLL CAGE AND RECEIVER BOX