M2C Arrma 8S MEGA MONSTER ROD ENDS (2mm Wall, MEGA ONLY)

For 12MM ID X 16MM OD Carbon fiber tube. 2MM is the wall thickness. (Carbon tube not included)

THESE ARE ONLY FOR THE M2C MEGA KRATON !!!! ONLY FOR 2MM WALL THICKNESS TUBE.

FOR THE MEGA YOU NEED 1 PACK OF THESE, AND 3 PACKS OF M2C 3291 TO COMPLETE THE TRUCK

Bashers have been using these carbon fiber tubes over their braces for years.

I just didn't like the unfinished look, so I came up with a solution that that will clean it up!!

**You will need the M2C 3291 MONSTER ENDS for the other end of the brace***

Installation is super easy, just cut your carbon tube to slightly shorter than your brace (1MM recommended).

I have included 2 2MM o rings to take up the slack between the tube and the end.

HAS A 1/8" THRU HOLE IN CASE YOU BREAK THE SCREW, YOU CAN JUST DRILL IT OUT FROM THE FRONT!

PRO TIP!! I have included 2 .5mm shims, you want the ends to be TIGHT.

You want 1/8 to 1/4 of a turn past hand tight and the flats to be in line (use hex drivers ).

You can use the included shims to achieve this.

You will need to dremel your steering top plate flush as shown to use these MONSTER rod ends.

The rear uses both tower positions, the front uses 1 tower, and 1 bulkhead position.

MADE FROM 7075 T6 AIRCRAFT GRADE ALUMINUM THESE WILL DEFINITELY STRENGTHEN YOUR RIG!

COMES IN A PACKAGE OF 2

2) ROD ENDS

2) 2MM O RINGS

2) M6 x .5MM SHIMS