Hobbywing Quicrun WP 1080 G2 Brushed ESC 2-3S

Key Features
New Aluminum Case
Real Car Mode
Over-Heating Protection
Electronic Switch
Low Voltage Cut-Off Protection

Features
Fully Water-proof and dust-proof, suitable for all-weather races.
Four operating modes available (Real Car Operating / FWD with Brake / FWD and REV with Brake / FWD and REV).
Real-Time Adjustment of Drag Braking Force.
PWM Frequency: 1K/2K/4K/8K/16K Adjustable.
Drag brake rate in 9 levels (adjustable).
Great current endurance capability.
Automatic throttle range calibration, easy to use.
Throttle signal loss protection, and much more.
Small in size, with a built-in capacitor module.
In the first "real car mode" The direction of the motor is switchable in real time by using the idle channel on the remote control.
15 programmable parameter items.
Freewheeling (DEO) capability.
Aluminum case for great heat dissipation.
Great built-in BEC output capacity switchable 6V/ 7.4/ 8.4V.
Low voltage cut-off protection for battery.

The First "Real Car Mode"
The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver). This new feature will provide the user with a unique experience unlike any other.

Four Running Modes Available
In addition to the “Real car running mode”, the other operating modes such as “Forward with brakes”, “Forward, reverse with brakes”, and “Forward and reverse” are also available.

Temperature Control Upgrade
The new design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs.

BEC Upgrade
The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market.

Real-Time Adjustment Of Drag Braking Force
Adjust the drag brake force in real time! With the Drag brake Force Signal connected to an open channel on the receiver, users can adjust the drag brake force on the fly without the need to connect the Programmer. (Requires open channel on receiver).

Multiple, Easy To Set Parameters
15 Programmable Items let drivers easily tune their vehicle with the LED Programming Box connected to the programming port.

IP67 Protection
IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces.

Product Specifications
Maximum Burst Current 400A
Maximum Continuous Current 80A
Motor Type Brushed
BEC Yes
BEC Voltage 6V/7.4V/8.4V @ 4A (switch-mode)
Input Voltage 2-3S LiPo or 5-9S NiMH
Motor Limit Brushed Motors 540/550 Series
Product Height 0.7244094" (18 mm)
Connector Type XT-60
Product Length 1.464567" (37 mm)
Programmable Yes
Low-Voltage Cutoff Programmable Yes
Overload Protection Yes
Product Weight 70.2g (2.48 oz)
Water-Resistant Yes
Product Width 1.255906" (32 mm)
Forward Yes
Reverse Yes
Wire Gauge 14 AWG
Amperage 80A
Speed Control Included