Great Planes ElectriFly TRITON2 Computerized Battery Charger/ Discharger & Cycler

TRITON2 incorporates the following feature improvements over the TRITON; Charge current increased to 7A (was 5A) Handles LiPo packs with up to 5 cells in series (was 4 cells max.) LCD now includes a Blue backlight for easy viewing (TRITON LCD is not backlit) Input cord has banana plugs but includes attachable large alligator clips (TRITON only had 'gator clips) Rotating dial is raised and modified for easier control

FEATURES: Great for many applications including Airplane and Heli Batteries, Tx and Rx batteries, Field Batteries and more Handles 1-24 cell NiCd/MH (1.2 - 28V) 1-5 cell Li-Ion or LiPo (3.6 or 3.7V cells) 6, 12, 24V Pb cell (2V per cell) Precision Zero DeltaV Peak Detection with adjustable sensitivity for NiCd and NiMH batteries "Constant Current / Constant Voltage" charge method for Pb and Li-Ion/LiPo batteries Fast Charge Thermal Cutoff (GPMM3151 Thermal Probe available separately) Top-Off Charge feature fully charges NiMHs without overheating 0-250mA adjustable TRICKLE Charge current (NiCd and NiMH only) .1-3A Adjustable Discharge Current Adjustable Discharge Cutoff Voltages for NiCd/MH, pre-set voltages for Pb and LiPo/Ion Perform 1 to 10 cycles (NiCd/MH only) Recall data for 10 full cycles Configure up to 10 batteries in memory for instant, easy recall and charger setup Displays Input and Output Volts, Peak Volts, Avg Dsch Volts, Chg and Dsch Capacity, Currents and Time, Error Messages (No Battery Connected, Open Circuit, and Reverse Polarity) Audible sound cues aid in programming and notification of function changes Warning messages for Improper Input Voltage, Poor Connections, Unsuitable Battery Condition, Reverse Polarity on output Safety features include Cool-Off Time Delay, Maximum NiMH Charge Input, Fast Charge Safety Timer, Current Overload and Reverse Polarity Protection Built-in cooling fan for better charge efficiency and extended charger life Small and lightweight, with a super-sturdy aluminum case for rugged durability 

INCLUDES: ElectriFly TRITON2 Computerized Battery Charger, Discharger and Cycler with banana plugs with mating alligator clips and instruction manual

SPECS: Input Voltage: 11-15V DC Input Connections: Banana plugs with mating alligator clips Number of Outputs: One Battery Types, # cells: 1-24 NiCd/MH (1.2-28V) 1-5 Li-Ion or LiPo (3.6 or 3.7V cells) 6, 12, 24V Pb (2V per cell) Fast Charge Current: .1-7A linear NiCd/MH (.1A step, 90W max) 1C rating for LiPo/Li-Ion (90W max) Fast Charge Termination: Zero DeltaV Peak Detection NiCd/MH CC/CV for Pb and Li-Ion/LiPo Optional Thermal Cutoff for all Battery Types Peak Sensitivity: NiCd 5-20mV, NiMH 3-15mV Peak Delay at Start: 0-60 minutes TRICKLE Charge Current: 0-250mA (NiCd/MH only) Fast Charge Safety Timer: 0-990 minutes NiMH Max. Charge Cap: 0-9900mAh NiMH Top Off Charge: 0-1000mA Thermal Cutoff: 50-150蚌 (10-65蚓), sensor optional Discharge Current: .1-3A Discharge Cutoff Voltage: NiCd/MH .5-1.16V per cell (.9V/cell fixed during cycle) Pb fixed at 1.8V per cell Li-Ion/LiPo fixed at 2.8V per cell Cycle Count: 1-10 cycles (NiCd/MH only) Cycle Time Delay: 1-60 minutes Battery Memories: 10 battery memories Programming Controls: Modified jog dial, 2 pushbuttons Display Type: 2 x 16 LCD with Blue backlight Displayed Info: Input and Output Volts, Peak Volts, Avg Dsch Volts, Chg and Dsch capacity, Currents & Time, Data for 10 cycles, Errors Audible Indicators: 10 Melodies. BUZZER OFF turns tones OFF. Output Connectors: Banana jacks Case Material: Extruded aluminum Cooling System built-in fan Current Overload: solid state Case Size: 6.2 x 4 x 2 in (157 x 102 x 51mm) Weight: 16.4oz (466g)