Futaba 6KV2 FPV 8-Channel Drone Transmitter W/ R3001SB S.Bus Receiver

FEATURES: R3001SB receiver offers telemetry capability, channel mode switching
high-voltage operation, dual antenna diversity, S.Bus and S.Bus-2
ports, uses up to 18 channels through SBus or SBus-2 ports
Airplane, Helicopter, Glider and Multicopter programming
Assignable switches (three 3-position, one 2-position)
Programmable mixes (3-normal, 1-curve) for airplanes, helicopters,
gliders and multi-rotors
S.Bus/S.Bus2 servo setting functions programmable through transmitte
Telemetry system (T-FHSS) with data speech (via earphones) function
for monitoring receiver battery voltage, external voltage,
temperature, RPM, altitude and variometer, current, capacity and
voltage
Backlit 128x64 DOT LCD screen with adjustable contrast
Program navigation bay with jog dial
Software updateable through the CIU-2 or CIU-3 interface units
Changeable switch/VR position and AUX channel function
One year limited warranty through Hobby Services beginning at date o
purchase

Multicopter Functions:
Flight Mode (Priority Flight Conditions and Matrix Flight Conditions
Center alarm
Dual Rate/Expo
Throttle Curve
Throttle Delay
Gyro
Airplane Functions:
Wing Type (5-wing, 2-tail)
Dual Rate/Expo
Throttle Curve
Idle Down
Gyro
Aileron Differential
V-Tail
Camber
Air Brake
Elevator to Flap Mixing
Flap to Elevator Mixing
Elevon Mixing
Glider Functions:
Wing Type (5-Wing, 2-Tail)
Condition Reset
Dual Rate/Expo
Motor Switch
Gyro
Aileron Differential
V-Tail
Butterfly Mixing
Trim Mixing
Elevator-to-Camber Mixing
Camber Mixing
Aileron-to-Camber Mixing
Heli Functions:
Swash Type (6)
Condition Select
Throttle Cut
Dual Rate/Expo
Trim Offset
Delay
Gyro Mixing
Swash AFR
Swash Mixing
Throttle Curve (5-point)
Pitch Curve (5-point)
Pitch to Rudder Mixing
Throttle Hold
Hovering Throttle
Hovering Pitch

INCLUDES: 6KV2 FPV 8-Channel Transmitter
Receiver, FUTL7620
Switch Harness
Neck Strap
Instruction Manual

REQUIRES: AA Batteries: Four AA for transmitter

SPECS: Transmitter:
Transmitting Frequency: 2.4GHz band
System: T-FHSS Air, S-FHSS switchable
Power Supply: 6.0V dry battery

Receiver:
Dimensions: 0.83 x 1.65 x 0.21" (21.1 x 41.8 x 5.3mm)
Weight: 0.15oz (4.2g)
Power Requirement: 4.8-7.4V
Battery FS Voltage: 3.8V