Futaba 6K Air Radio SystemW/ R3006SB

$257.80
Out of Stock
SKU
4513886207631

This is the Futaba 2.4GHz 6K Air Radio System
with the R3006SB T-FHSS SBUS, SBUS2 Receiver.

This is the airplane version which will default to airplane settings
when powered up and has a ratcheted throttle stick.

The 6K is more versatile than ever, thanks to Version 2 firmware that adds
two more channels. This makes it possible for the 6K to accept additional
accessories, including optional SBS-01C and SBS-01V telemetry sensors that
gather real-time data for motor current, battery voltage and capacity. Other
new features include expanded Multicopter flight modes and a unique "Throttl
Integrate" option that links the timer speed to throttle position. Download
the V2 firmware now to get the most out of your 6K!

FEATURES: Telemetry system (T-FHSS) with data speech (via earphones) provides
data on receiver battery voltage, external voltage, temperature
RPM, altitude and variometer, current, capacity and voltage
(sensors not included and must be purchased separately, see
COMMENTS below)
S.Bus/S.Bus2 servo setting functions programmable through transmitte
R3006SB receiver can use SBus as the main link/communication to
servos, or a combination of SBus and conventional outputs together
Four assignable switches, three 3-position and one 2-position
Switch/VR position change and AUX channel function change
Updateable software through the Futaba CIU-2 USB PC Interface, or
CIU-3 Interface, not included
Programmable mixing (3-Normal, 1-Curve) for airplanes, helicopters
gliders and multi-rotors

Airplane Functions;
Wing Type (5-wing, 2-tail)
Throttle Cut
Aileron Differential
Dual Rate/Expo
V-Tail
Throttle Curve
Camber
Idle Down
Air Brake
Gyro
Elevator to Flap Mixing
Flap to Elevator Mixing
Elevon Mixing

Glider Functions;
Wing Type (5-wing, 2-tail)
Condition Select
Butterfly Mixing
Dual Rate/Expo
Trim Mixing
Motor Switch
Gyro
V-Tail
Elevator to Camber Mixnig
Aileron to Camber Mixing
Aileron Differential
Camber Mixing

Helicopter Functions;
Swash Type (6)
Condition Select
Throttle Cut
Dual Rate/Expo
Trim Offset
Delay
Gyro Mixing
Swash AFR
Swash Mixing
Throttle Curve (5-point)
Pitch Curve (5-point)
Pitch to Rudder Mixing
Throttle Hold
Hovering Throttle
Hovering Pitch

Multicopter Functions;
Flight Mode
Center Alarm
Dual Rate/Expo
Throttle Curve
Throttle Delay
Gyro

Wing Type (5-Wing, 2-Tail);
Throttle Cut
V-Tail
Camber
Dual Rate/Expo
Camber
Throttle Curve
Airbrake
Idle Down
Gyro
Aileron Differential
Elevon Mixing
Elevator to Flap
Flap to Elevator

Transmitter also compatible with S-FHSS receivers
Wirless model data transfer to other T6K transmitters
30 model memory, model naming up to 8 characters
Auxiliary channel
Parameter functions
Servo monitor/test
Throttle position warning
Timer-system & model (Up/Down/Down-Stop) with vibration alert
Trainer system (trainer cord required)
Fail safe
End points
Built-in full range antenna
One year limited warranty through the Futaba Service Center
beginning at date of purchase

INCLUDES: Futaba 2.4GHz 6K Transmitter
R3006SB Receiver, FUTL7683
Switch Harness

REQUIRES: AA Batteries: Four for transmitter
Sensors and Servos of modeler's choice

SPECS: Transmitter;
Transmitting Frequency: 2.4GHz band
System: T-FHSS Air, S-FHSS switchable
Power Supply: Four AA batteries
Receiver;
Power Requirement: 4.8V~7.4V battery or regulated output from ESC
Size: 1.7 x 0.98 x 0.35 " (43.1 x 25.0 x 8.8 mm)
Weight: 0.3 oz. (8.5g)
Battery: F/S Voltage

More Information
Part # FUTK6100
Brand Futaba
Channels 6
Frequency 2.4
Transmitter Only No