Futaba 10CG Heli W/R6014HS

This heli version will default to helicopter settings,
with mode 2 stick operation when powered up and has a non-ratcheted
throttle stick.

FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts
very quickly virtually eliminating signal conficts and
interruptions unlike other 2.4GHz systems that only stay on one
or two frequencies
Dual antenna diversity enables FASST system to automatically and
seamlessly select the best reception between the two antennas
built into the receiver ensuring that the aircraft stays under
constant control of transmitter regardless of altitude
Graphics for programming swash plate types, swash ring and logic
switches allowing timer activation or other function just by
changing positions of specific sticks or functions
6 programmable heli mixes
Hover/pitch
Hover throttle
8 swash plate types with graphics
Swash AFR
5 point revo mixing
Gyro menu
7 point throttle and pitch curves with delay
High/low pitch setting
Throttle hold and three idle-ups with delay
One year limited warranty

INCLUDES: Futaba 10C Transmitter
NT8S700B 9.6V 700mAh NiCd Transmitter Battery ,
FBC-19B 120V AC RX, TX Wall Charger,
R6014HS Receiver,
Switch Harness
8" (203mm) Servo Extension
Neck Strap,
REQUIRES: Servos depending on type of aircraft
4.8V receiver battery of modeler's choice

SPECS: Transmitter;
Power Supply: 9.6V NT8S700B NiCd battery
Receiver;
Receiving Frequency: 2.4GHz
Power Requirement: 4.8 - 6V
Current Drain: 70mA
Size: 2.06 x 1.48 x 0.63" (52.3 x 37.5 x 16.0mm)
Weight: 0.72oz (20.8g)