Estes Boosted Bertha Model Rocket Kit

A sport rocket at its core, the second booster of this multistage flying model rocket will push this Bertha skyward, reaching twice the height of Big Bertha. The Boosted Bertha will reach altitudes of 1000 feet when powered with an Estes C6-0 engine in the booster stage and an Estes C6-5 engine in the main rocket. After the first stage ignites, the booster jettisons and gently tumbles back to earth. Once the rocket reaches apogee, the rocket will deploy the recovery system - a colorful 18 inch parachute. This provides the Boosted Bertha a light landing so that it can be quickly prepared for another launch.

Quality Estes body tubes, laser cut wood fins, a molded plastic nose cone, and easy-to-apply waterslide decals make for a full day of building enjoyment. Once painted to perfection, this Bertha is a must-have for any rocket collector!

WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, sandpaper, carpenters glue, plastic cement, hobby knife, masking tape, clear tape, primer (white), paint (orange, white), clear coat (optional). Tools, construction and finishing supplies not included.

WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II launch pad with launch controller, Estes model rocket engines, recovery wadding and 4 1.5V high quality AA alkaline batteries (not included).

Recommended Engines: Upper-Stage Rocket Only (NO BOOSTER): B4-2, B4-4, B6-2, B6-4, C6-5 Booster Rocket (two-stage): Upper: A8-3, B4-4, B6-2, B6-4, C6-5 Booster: B6-0, C6-0

Specifications:

Length: 28.2in
Diameter: 1.64in
Estimated Weight: 4.00oz
Estimated Assembly Time: 4 Hours (painting and glue drying time not included)
Fin Materials: Laser Cut Wood
Launch System: Porta Pad II and Electron Beam Launch Controller