Electrifly Super Sportster Ep Rxr

FEATURES:

Construction: AeroCell foam
Wing: Two-piece with carbon wing tube and one bolt attachment to
fuselage
Aileron Control: Dual servo
Motor: Brushless, specs such as kV rating and RPM not provided by
manufacturer
Electronic Speed Control: 18A with 2A/5V BEC and 5.5-17V DC input
Propeller: Great Planes 9x6 Power Flow (GPMQ6640)
Cowl: Molded white plastic
Canopy: Foam, attaches to fuselage with magnets
Landing Gear: Prebent wire 0.10" (2.5mm) diameter
Wheels: Foam 2" (51mm) diameter main, 0.63" (16mm) diameter tailwheel
Spinner: White plastic 1.75" (44.5mm)
Servos: Four micro, (two aileron, one rudder and one elevator)

INCLUDES:

RXR ElectriFly Super Sportster with ESC, Four Servos, Brushless Motor Prop, Prop Adapter, Spinner and Instruction Manual

REQUIRES:

Radio: 4-channel transmitter and receiver
LiPo Battery: 1250-1300mAh 3S 11.1V, GPMP0505
Adapter: Deans Ultra Male to SuperTigre Female, if using battery
listed above
Battery Charger LiPo compatible
Building and field equipment

SPECS:

Wingspan: 40" (1015 mm)
Wing Area: 267 in² (17.2 dm²)
Weight: 20-22oz (565-605g)
Wing Loading: 10.8-11.5 oz/ft² (33-35 g/dm²)
Length: 32.5" (825mm)
Center of Gravity (CG): 2-5/8" (67mm) back from the leading edge of
the wing measured at the fuselage side
Control Throws- Low Rate High Rate
Elevator Up & Down: 1/4" (6mm) 7° 9/16" (14mm) 16°
Rudder Right & Left: 5/8" (16mm) 14° 7/8" (22mm) 19°
Ailerons up and Down: 7/32" (6mm) 9° 5/16" (8mm) 13°