Bob Smith Industries IC-2000 Black Rubber Toughened CA 1oz

IC-2000 is a rubber-toughened cyanoacrylate that forms shock-resistant bonds on non-porous surfaces. The black-colored CA has added flexibility for bonding metals, fiberglass, rubber, carbon-fiber, and other advanced materials. For model use, IC-2000 is ideal for bonding bulkheads, formers, and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET. When cured, IC-2000 is pliable enough to be carved with a hobby knife. IC-2000 is the best adhesive for R/C car tires.

IC-2000 has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry, and many others that need the most durable, shock-resistant fast bonding adhesive available.

Works Best On:

R/C Rubber Tires
Glass & Metal
Fiberglass
Hard Plastics
Rubber
Reinforcing

Works Good On:

Balsa Wood
Soft Wood
Hard Wood
Ceramics
Laminating
Water-Resistant

Directions:

Screw on the top and cap unit to puncture the seal on the tube. Remove the cap and apply IC-2000 CA to one side of the parts being joined, then hold them tightly together for 10-25 seconds for shock-resistant joints. For larger bonding areas, apply serpentine beads of the CA, allowing for the spreading of the adhesive. For maximum flexibility, do not use with an accelerator. Full strength is reached in three hours. Wipe the nozzle clean before replacing the screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 250º F. The top and tip can be soaked in acetone for cleaning.