GS-40 Ringed w/Silent Muffler
This is a .40 size Sport Engine from SuperTigre. This one has the Silent Muffler from SuperTigre.
Single RINGED piston and cylinder sleeve
Includes the Silent muffler with exhaust stack
Two crankshaft ball bearings
INCLUDES: One Assembled GS40 Ringed Engine w/Carb.
One Muffler, Gasket, Mounting Nuts, Bolts, Brass Pressure Fitting,
and Exhaust Stack.
One Glow Plug
One Set of Instructions, Parts List, and Decals
SPECS: Bore: 21.5mm (.846")
Stroke: 17.8mm (.701")
Weight w/o muffler: 372g (13.05oz)
Weight with muffler: 541g (19.1oz)
RPM Range: 3,000-17,000
Displacement: .39 cu in. (6.46cc)
Power Output: 1.15 BHP at 15,500 RPM
Width between centers of mounting holes: 42mm (1.65")
Length between centers of mounting holes: 19mm (.75")
Width of crankcase excluding mounting flanges: 34mm (1.34")
Length from backplate to front of drive washer: 80mm (3.15")
Height from bottom of crankcase to top of head: 84mm (3.31")
Crankshaft size: 1/4-28
Suggested prop size: 9x7, 9x8, 10x5, 10x6, 10x7, 11x4, 11x5
Carb Settings: H-2-turns out from closed position.
L- Take carb off, rotate and look at bottom side.
Turn trottle until wide open, set tip of low end
needle half-way across cat eye.
|Fuel Type||Nitro / Glow|