Castle Mamba X SCT Pro ESC W/1410 3800kV Motor 5mm Shaft

$299.05
In Stock
SKU
819326011313

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,
with the 1410 3800Kv Brushless Motor.

**Ideal for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs**
**using 2S LiPo power, and stadium trucks up to 4lbs using 2-3S LiPo power.**

FEATURES: ESC;
2S - 6S input voltage range
Smartsense uses motor's sensors for smooth starts, excellent torque
and low-speed drivability - then transitions to the sensorless
mode with electronic timing, Smartsense automatically advances
timing for peak performance during all driving conditions
On-the-fly adjustments can be made through the AUX wire once enabled
in Castle Link, then settings can be tuned from transmitter while
driving
Recordable real-time data such as RPM, battery current and voltage,
ESC and motor temperature, throttle input and more
Audible alerts
CNC aluminum case
12AWG high strand count silicone insulated battery wires
One year limited warranty through Castle Creations beginning at date
of purchase
Motor;
High-strength 180°C grade neodymium sintered magnets with high-
strength wrap
High-temperature, high purity copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration dampening wave spring on shaft
Rotor position sensor eliminates cogging and inconsistency during
startup
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high strand count silicone insulated wires with 4mm male bulle
connectors
Four pole configuration for maximum efficiency at high RPM
ROAR standard sensor port and labeled connections
Replaceable front end bell/bearing assembly and rotor/shaft assembly

INCLUDES: Mamba X Extreme 1/10 scale Electronic Speed Control
Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector
and Waterproof Switch
Replaceable Motor Sensor Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated Male and Female Bullet Motor Connectors
1410 1Y 3800Kv 4-Pole Sensored Brushless Motor,
Sensor Wire
Three 3x5mm Socket Head Cap Screws

SPECS:
ESC,
Input Voltage Range: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to
run
Motor;
Input Voltage Range: 2-3S LiPo
Kv: 3800
Max RPM: 100,000
Length: 2.1" (52.7mm)
Diameter: 1.4" (36mm)
Shaft Diameter: 0.197" (5mm)
Shaft Length: 0.61" (15.5mm)
Weight: 8.4oz (237g)
Mounting Hole Size: M3 @ 25mm

COMMENTS: Waterproof under normal operation. Not intended for operation when
completely submerged in water.

More Information
Part # 010-0161-01
Brand Castle Creations
Brush Type Brushless
KV Rating 3001-6000
Runner Type Inrunner
Sensor Type Sensored
Vehicle Type Car