Castle Mamba X 25.2V WP ESC W/1406 2280kV Slate Crawler Combo

$349.99
In Stock
SKU
819326011801

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC with the 1406 4-Pole 2280Kv Sensored Brushless Motor. Ideal for low speed crawling or trail running in vehicles weighing up to 9lbs (4.1kg) on 2S to 4S LiPos, can also be used in more aggressive setups such as rock racing and extended hill climbing on vehicles up to 5lbs (2.3kg)

ESC;

  • 2S - 6S input voltage range
  • Smartsense uses motor's sensors for smooth starts, excellent torque and low-speed drivability - then transitions to the sensorless mode with electronic timing, Smartsense automatically advances timing for peak performance during all driving conditions
  • On-the-fly adjustments can be made through the AUX wire once enabled in Castle Link, then settings can be tuned from transmitter while driving
  • Recordable real-time data such as RPM, battery current and voltage, ESC and motor temperature, throttle input and more Audible alerts
  • CNC aluminum case
  • 12AWG high strand count silicone insulated battery wires

Motor;

  • 4 pole 12 slot design for high degree of efficiency and less heat
  • SMARTSENSE uses motor's sensors to provide smooth starts, excellent torque and low-speed drivability-once motor is turning it transitions to sensorless mode
  • QUIETSENSE technology shields sensors from magnetic field noise generated from the motor coils keeping motor and ESC in sync at al times
  • ROAR standard sensor port and labeled connections
  • High performance 0.2mm steel lamination stacked stator
  • CNC machined anodized 6061 T-6 aluminum motor can and endbells
  • Rebuildable design allows replacement of front end bell/bearing assembly or rotor/shaft assembly

INCLUDES:

Mamba X Extreme 1/10 scale Electronic Speed Control
1406-2280Kv Sensored Brushless Crawler Motor
8.3" (210mm) length Sensor Wire for Sensored Operation
Castle Sensor Harness Adapter
Coupon for free Castle Link USB Adapter
Driver's Ed and Quick Start Guides
Castle Decal Sheet

REQUIRES:

Battery connectors to match selected battery

SPECS:

ESC, :
Input Voltage Range: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to
run

Motor,
Input Voltage Range: 2-4S LiPo
Kv: 2280
Max RPM: 100,000
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight: 6.9oz (197g)
Shaft Length: 0.59" (15mm)
Shaft Diameter: 1.8" (3.17mm)
Mounting Hole Specs: M3 @ 25mm
Connectors: 4mm Male Castle Bullet Connectors attached to 13 gauge
wire
Sensor Wire Length: 8.3" (210mm)

More Information
Part # 010-0155-09
Brand Castle Creations
Brush Type Brushless
KV Rating 1001-3000
Runner Type Inrunner
Sensor Type Sensored
Vehicle Type Car