Castle 1/18 Mamba Micro X Waterproof Esc
This is the Castle Creations Mamba Micro X Waterproof Electronic Speed Control
For 1/18 scale 2 or 4 wheel drive vehicles weighing up to
2.25lbs (1.02kg)
Heavy-duty BEC (battery eliminator circuit) handles high-draw
digital servos
Adjustable settings include;
Throttle Punch Control
Braking Curve Reverse Type
Drag Brake Motor Type
Auto LiPo Cutoff
Programmable Auxiliary Wire (AUX) allows adjustments to several
settings such as torque control and max throttle from a compatible
transmitter
INCLUDES: Mamba Micro ESC
Motor Leads with 3.5mm Bullet Connectors
Pretinned Battery Leads (require connector to mate w/selected
battery, 4mm Castle Creations connectors recommended)
On/Off Switch
Receiver Connector
Instruction Booklet
REQUIRES: Compatible Motor and LiPo Battery, recommended battery capacity for
1/18 scale vehicles is 1500mAh, 30C or higher continuous
discharge
SPECS: Input Voltage Range: Min. 2S LiPo, Max. 3S, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Switch: Waterproof
Dimensions: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without connector
COMMENTS: Not intended for operation while submerged in liquid. If unit is
operated in wet conditions, rinse with fresh water to remove
dirt or corrosives, then fully dry unit.
Requires power connector
Part # | 010-0147-00 |
---|---|
Brand | Castle Creations |
Brush Type | Brushed, Brushless |
Sensor Type | Sensorless |
Vehicle Type | Car |